Description
Heatmiser Window Door Sensor
The Heatmiser Window Door Sensor can be used with the Touch V2 or Neo System and can be used to switch the heating off whenever a window or door is opened.
This Wireless Window / Door Contact Sensor pairs directly with the Touch v2. With the Neo System the Wireless Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.
Using the Wireless Contact Sensor with the Neo System
The Wireless Contact Sensor can be paired to one or multiple zones. When the window or door is open, the neoHub will switch the linked zones into Standby mode. Once the window or door is closed, the Standby mode will be cancelled.
The app allows for an Open/Close delay to be setup, giving you the flexibility of how quickly the window open detection triggers.
Important Neo Compatibility Notes
- RF Sensor support is only available on the neoHub Gen 2. To determine if you have a neoHub Gen 2, look at the rear of your neoHub for a label marked “2nd generation”.
- The RF sensors are not visible in HomeKit, Google Home, Alexa, IFTTT at this time.
- The RF sensors communicate directly to the neoHub. Depending on signal strength in your home, you may require additional boosters such as the neoPlug or Booster.
- For compatible thermostats, consult the Contact Sensor Datasheet.
The Wireless Contact Sensor technical specifications:
- Range: 40 meters open space. Please note the wireless sensor pairs directly to the neoHub and does not benefit from the mesh network. Therefore you may require additional neoPlug or Boosters to extend the signal around your home.
- RF Frequency: 868MHz.
- IP Protection: IP20.
- Colour finish: White.
- Dimensions: 23.9 x 60.6 x 10.5mm.
- Weigh: Sensor including battery = 25g; Magnetic Contact 34g.
- Delivery time: Can be next day depending upon stock availability at time of order.
- Manufacturer’s product warranty: 2 years.
Reviews
There are no reviews yet.